BRAND NEW
Quick And Easy To Use – No Marking Out Required
Easy To Remove
Can Be Used On Concrete, Brick, Wood, Marble, Block & Stone
Available In Sizes M6, M8 Or M10 With 75mm Or 100mm Thread
How It Works
1. Simply Drill A Hole Slightly Smaller Than The Concrete Bolt (See Table)
2. Remove Any Loose Dust From The Hole.
3. Screw In The Concrete Bolt With A Socket Wrench And
Apply A Slight Downward Pressure To Start The Self-Tapping Action.
4. Tighten The Concrete Bolt To Secure The Fixture In Place.
5. Job Done.
Reviews
There are no reviews yet.